Current location: Home > Product series > Stator temperature sensor
Product series
Stator temperature sensor
Chip type stator temperature sensor

Chip-type stator temperature sensor T2010Pt100-100-5-3200/01
——————————————————————————————————————————————————————
Chip-type stator temperature sensor (T2010Pt100-100-5-3200/01) has small temperature rise and reliable temperature measurement. The temperature sensing element extends to most of the length of the sensing body to provide the average temperature reading in the temperature measurement area. This avoids the danger that the point temperature sensor misses the local hot spot.

 
Applications of chip-type stator temperature sensor
——————————————————————————————————————————————————————
It is applied in monitoring the temperature of generator stator winding, iron core and pressure finger.

 
Functional characteristics of chip-type stator temperature sensor
——————————————————————————————————————————————————————
The winding temperature sensing element adopts laser welding technology to prevent the solder joints from loosening or falling off in case of strong vibration, which effectively improves the stability of measurement.
The cable insulation layer is made of high-temperature and tension resistant materials.
In particular, magnetization resistance, temperature resistance and insulation performance shall be taken into consideration for packaging materials.
Technical indexes comply with JBT10500.1-2005 and JBT10500.2-2005. 
 
 
Main technical indexes of chip-type stator temperature sensor
——————————————————————————————————————————————————————
Model Chip type stator temperature sensor
T2010Pt100-100-5-3200/01  
Temperature measuring range -50~260℃
Wire system Three wire system
Insulation grade Class F (155 ℃), H (180 ℃)
Accuracy grade Class A /B 
Maximum excitation current 5mA
Insulation resistance at room temperature 大于100MΩ
Withstand voltage 2500VAC/min
Pressure resistance 2MPa
Lead longitudinal pressure resistance 200N
Tightness Immerse in water for 1H at ambient temperature
Thermal cycle The change value of resistance at 0 ℃ shall not exceed 0.12 Ω
Application It is applied in monitoring the temperature of generator stator winding, iron core and pressure finger.



Recommended parameters of chip-type stator temperature sensor
——————————————————————————————————————————————————————
Recommended model T2010Pt100-100-5-3200/01
Recommended parameters for winding chip-type thermal resistor
Application site Temperature monitoring of motor stator winding, iron core and pressure finger
Thickness 2mm width 10mm Length  100mm
Connection form Three wire system Number of pairs
Single piece
Protective pipe
Fiberglass pipe protection
Connection form Swinging wire head Length of fiberglass pipe  200mm Cable form Round wire with shielding